Home | Mailing List | Specifications | Care and Feeding | Modifications | Vendors | Literature
new 09/22/2004
How do you remove the ac clutch, I need to set the gap. I don't see any bolts
or
nuts.
Peter
_____________________________________________________________________
Peter-
Remove the A/C Compressor from the engine block by removing 3 long screws with
13mm heads, the Compressor will drop so be ready to support it somehow. After
removing the Compressor, get a 15mm socket on the nut in the center of the
Compressor pulley and remove the nut. The pulley will come apart now. Inside the
pulley on the shaft is a tiny spacer - take it out and put everything back
together.
You will find this job easiest if you remove the passenger's front tire and
plastic wheel well liner to get at the side of the motor.
Regards
Eric Lehmann
97 Ebony - welded
97 Toreador Red # 285 - welded
96 Willow Green # 326 - welded
91 Jade Plus SHO-fa