Home | Mailing List | Specifications | Care and Feeding | Modifications | Vendors | Literature

 

Replacing Head Parts

new 6/04/2004


Anyone got a parts list if one were to R&R the heads?

Thanks

Paul Nimz

__________________________________________________________________________

SPECIAL SERVICE TOOL(S) REQUIRED

Description Tool Number

Valve Spring Compressor Set T87C-6565-A

Valve Guide Remover/Replacer T89P-6510-A

Valve Stem Seal Remover T89P-6510-D

Impact Slide Hammer T59L-100-B

Valve Stem Seal Replacer T89P-6510-C

Item Part Number Description

1 6250 Camshaft

2 6049 Cylinder Head

3 6507 Intake Valve

4 6514 Valve Spring Retainer

5 6571 Valve Stem Seal

6 6513 Valve Spring

7 6514 Valve Spring Retainer

8 6518 Valve Spring Retainer Key (2 Req'd)

9 6500 Valve Tappet

10 6515 Valve Adjusting Spacer


Item Part Number Description

1 6L089 Dowel Pin (4 Req'd)

2 6026 Plug

3 6049 RH Cylinder Head

4 6049 LH Cylinder Head

5 6K257 Dowel Pin (42 Req'd)

6 6K046 Stud Bolt (12 Req'd)

7 6026 Pipe Plug (10 Req'd) (1/4 Inch)

8 6026 Pipe Plug (4 Req'd) (1.0 Inch)

A -- Tighten to 15-26 N-m (11-19 Lb-Ft)

B -- Tighten to 8-11 N-m (71-97 Lb-In)

C -- Tighten to 71-86 N-m (5 -6 Lb-Ft)

Item Part Number Description

1 6049 Cylinder Head

2 6507 Intake Valve

3 6514 Valve Spring Retainer

4 6571 Valve Stem Seal

5 6513 Valve Spring

6 6514 Valve Spring Retainer

7 6518 Valve Spring Retainer Key (2 Req'd)

8 6500 Valve Tappet

9 6515 Valve Adjusting Spacer


jj

Well guess that just about covers it. Thanks jj.

U.L.

 


Contact Information