Fuel pump cutout

Fuel pump cutout

FINALLY. Kick out the back seat bottom cushion, layout the floor, cut carefully, and replace your fuel pump without having to drop the tank.

The early Taurus folks have been doing this for a while. I took the opportunity to get some dimensions for the Gen 3 cars while chopping up this 96 parts car.

Early pic. I'll do a writeup shortly.

Before people start nitpicking - I KNOW I nicked some wires and hoses, I didn't care, I'm throwing out this car - I recommend doing this cutout with a small, light duty Rotozip or Dremel tool and keeping your cuts shallow so you don't hit any wires or hoses.
I used a 8" heavy grinder with a 1/4" thick cutting wheel set on "Kill".

--
Eric Lehmann
97 Ebony 42k Welded - With the Angels Now so that I don't have to be. Long Live the Garage Queen !
97 Ebony 198k Resurrected, Welded
96 Medium Willow Green Metallic 150k, blown nomo ;-(
96 Rosemist 74k 2006 Best Of SHO, Popular Vote, 2007 Best Gen 3, Welded
96 Charcoal Grey 152k - Resurrected, Welded

Contact Information