Home | Mailing List | Specifications | Care and Feeding | Modifications | Vendors | Literature


SHO Shop Roll Pin Solution

Thanks to our Friends at the www.shoshop.com
new 10/23/01

Take a good look at the photos below and SHO Shop is drilling the cam and hub and putting a pin in 90 degrees to the long axis of the cam shaft.


Enclosed are pictures of our V8 modified cams. Note the roll pin location. I'll be sure to keep you in the "loop" of happenings here at SHO Shop.

Let me know if I can be of any more help

Tom Guagliardo
Sales/Tech - SHO Shop
714-894-8415 Voice
714-894-8901 Fax

V8cam1.jpg (36678 bytes)v8cam2.jpg (33539 bytes)

Contact Information