SHO Training Video Available for Free Download

New 8/18/05

Thanks to the kindness of your very own Brian Cooper (bcooper5@aol.com), there is a new addition to the FordCDs page: the Ford-produced factory training video for the Gen3 SHO. It has been encoded as an .AVI file and can be found at the bottom of the FordCDs page on my server:

http://www.jonheese.com/fordcds/

It is ~325MB (I think it runs around 20 minutes) and so not for the faint of heart. The server has been running a bit slow since a recent upgrade, so if the above link doesn't work, or is too slow, I've created a mirror here:

http://www.the-rus.com/fordcds/

Only the recently-added video is hosted on the mirror server; all of the Service Manual ISOs on that page still link to the jonheese.com server.

As always, let me know if you run into any problems and I'll try to get them worked out. If someone could post this message to the web forums (e.g. SHOForum, TCCA, etc.), I'd be much obliged.

Regards,
Jon Heese

Contact Information