Home | Mailing
List | Specifications | Care
and Feeding | Modifications | Vendors
| Literature
Engine & Transmission Support
Front Engine Support Insulator
Removal
1. Raise vehicle.
2. Place jack and wood block in suitable place under engine block.
3. Remove nuts retaining LH front engine support insulator and RH front
engine support insulator to front sub-frame.
4. Raise engine with jack (enough to unload LH front engine support
insulator and RH front engine support insulator).
5. Remove two retaining bolts from LH front engine support insulator
and remove LH front engine support insulator from A/C compressor mounting
bracket (3.0L) or front engine support insulator (3.4L) .
6. Remove through bolt from RH front engine support insulator and remove
RH front engine support insulator from front engine support mounting bracket.
Front Engine Support Insulators, 3.4L SHO Engine
| Item |
Part Number |
Description |
| 1 |
6028 |
Front Engine Support Bracket (RH) |
| 1 |
6031 |
Front Engine Support Mounting Bracket (LH) |
| 2 |
5C145 |
Front Sub-Frame |
| 3 |
N802978-S427 |
Nut (2 Req'd) |
| 4 |
6038 |
Front Engine Support Insulator, LH |
| 5 |
N805370-S101 |
Bolt (2 Req'd) |
| 6 |
N606572-S426 |
Bolt |
| 7 |
6038 |
Front Engine Support Insulator, RH |
| 8 |
N605923-S36 |
Bolt (3 Req'd) |
| A |
-- |
Tighten to 77-103 N-m (57-75 Lb-Ft) |
| B |
-- |
Tighten to 60-80 N-m (45-59 Lb-Ft) |
| C |
-- |
Tighten to 53-72 N-m (39-53 Lb-Ft) |
Installation
1. Attach LH front engine support insulator to front engine support
insulator (3.4L) with two bolts. Tighten bolts to 60-80 N-m (44-59 lb-ft).
2. Attach RH front engine support insulator to case rear bracket with
one through bolt. Tighten through bolt to 53-72 N-m (39-53 lb-ft).
3. Lower engine down onto front sub-frame.
4. Note: Because the anti-rotation hole of the front sub-frame is oversized,
prevent the front engine support bracket from rotating when tightening
to avoid NVH problems.
Install nuts retaining LH front engine support insulator and RH front
engine support insulator to front sub-frame. Tighten nuts to 77-103 N-m
(57-75 lb-ft).
5. Remove jack and lower vehicle.
Engine and Transmission Support Insulators, 3.4L SHO Engine
| Item |
Part Number |
Description |
| 1 |
5C145 |
Front Sub-Frame |
| 2 |
6F063 |
Engine and Transmission Support Insulator |
| 3 |
6096 |
Rear Engine Support Bracket |
| 4 |
6038 |
Front Engine Support Insulator, LH |
| 5 |
6038 |
Front Engine Support Insulator, RH |
| 6 |
6028 |
Front Engine Support Bracket |
Engine and Transaxle Support Insulator
Removal
1. Raise vehicle on hoist.
2. Remove LH tire and wheel.
3. Place Rotunda High Lift Transmission Jack 014-00210 or equivalent
and under transaxle and support transaxle.
4. Remove nut retaining engine and transmission support insulator to
rear engine support bracket.
5. Remove two through bolts retaining engine and transmission support
insulator to front sub-frame.
***unfinished***
Contact Information
